- How To Program A Lattice Cpld Software Using
- How To Program A Lattice Cpld Software Pdf
- How To Program A Lattice Cpld Software Free
- How To Program A Lattice Cpld Software Developer
- How To Program A Lattice Cpld Software For Beginners
The ispLEVER software follows an im plementation flow that generates a programming file from your CPLD design files. A similar flow exists within the Quartus II software known as the compilation flow. The compilation flow is the sequence and method by which the Quartus II software translates your design files, maps the translated design to device. The ispLEVER Classic design software includes all the features necessary to take a project from concept to programmed device. Pricing and Availability. My defaultkeybinding.dict for mac. The ispMACH 4032ZE CPLD is available in the 48-TQFP and 64-ball csBGA package. The ispMACH 4064ZE CPLD is available in the 48-TQFP, 64-ball csBGA, 100-TQFP and 144-ball csBGA. 3.5.2 CPLD Architecture Issues When considering a CPLD for use in a design, the following issues should be taken into account: 1. The programming technology. EPROM, EEPROM, or Flash EPROM? This will determine the equipment needed to program the devices and whether they came be programmed only once or many times. The function block capability.
- Lattice Diamond Programmer offers an easy to use solution for programming all Lattice JTAG-based devices. In addition to FPGAs supported in Lattice Diamond, devices from ispLEVER Classic, PAC-Designers, and iCEcube2 are supported by Programmer when used in standalone mode.
- Hi All, edaboard user pointed me to Lattice iCE40LP low end FPGA chips as an inexpensive replacement of bigger CPLDs. Chips looks really interesting to me even though they require 1.2V, 2.5V and eventually 3.3V power supplies. I decided to give them a try. The chips includes nonvolatile.
That just leaves the Lattice FPGA in the keyboard to program.
First step is to program the MAX10, so that can route the JTAG to the Xilinx and Lattice FPGAs. This done using the Quartus tools, but remember to hold the reset button in on the MEGA65 mainboard, as that asserts the JTAGEN line on the MAX10. The Arrow FPGA programmer module needs to be plugged in to do this. Then the normal Quartus programmer interface can be used (but remember to first have fixed the problem with the Arrow FTDI USB driver setup by following these instructions).
Actually, we simplified this by making a program.sh script, that does the programming itself -- but you still have to hold the reset button in.
Second step is to program the Xilinx FPGA, because our current MAX10 firmware connects the JTAG interface to the Xilinx FPGA until it asserts the FPGA_DONE signal, i.e., has been programmed. This requires using the TE0790 cable, and if you have the Arrow cable plugged in at the same time, you might need to run fpgajtag with the -s option to specify the serial number of the cable to uses. If that is successful, the MEGA65 will now have the friendly blue boot screen visible.
That leaves the third step. Here we had a bit of fun dealing with a JTAG latency problem with the bypass through the MAX10 FPGA as well as the latency of using a conveniently long keyboard cable. We thought about making a custom programming cable, but would prefer to keep things simple, so decided to explore how we might defeat the latency problem. Setting the 'Programming Speed Settings' in Lattice's Diamond software's programming utility managed to make it work for us, and we were then able to flash the keyboard. Yay!
What we will do, is make the JTAG bypass of the MAX10 dependent on a dip-switch, so that we can talk to either the keyboard or Xilinx FPGA as required, e.g., so that we can flash the SPI flash so that it automatically boots up on power up. This I have now, done, so we can flash the configuration for the Xilinx FPGA as before, using a command line like:
How To Program A Lattice Cpld Software Using
./megaphone-write-flash.sh bin/mega65r2.mcsThis works even though it is the MEGAphone targeted script, because the MEGAphone and MEGA65 R2 mainboards both use the same serial flash chip for storing the configurations.
But before we do that, we really need to flash our updated MAX10 bitstream, because the initial one that is there stops listening to JTAG when the Xilinx FPGA is configured. This means that we need a nice easy way to write to the flash in the MAX10 FPGA, and this turns out to not be that simple.
![Software Software](https://i.ebayimg.com/images/g/mLwAAOSwJSJXGuq5/s-l300.jpg)
After talking to Antti, it turns out there is a really simple way to flash the internal flast in the MAX10: Simply program with the .pof file instead of the .sof file. This works nicely, so I have made a script flash.sh in the MAX10 repository for this.
So, let's go over all of this from the top, now that we have the various tools at the ready:
How To Program A Lattice Cpld Software Pdf
0. Plug in both the TE0790 and Arrow programmers to the board.
1. If Xilinx FPGA is already configured, then unconfigure it by running fpgajtag -s <serial number> <a valid bit stream> and pressing control-c as soon as it says 'starting to send file'.
2. Hold the reset button in to put the MAX10 into JTAG mode, and run the flash.sh script to flash the MAX10 FPGA with our bitstream.
3. Release the reset button, and ensure dipswitch 1 is in the off position, to select the Xilinx FPGA for JTAG bypass.
4. Run ./megaphone-write-flash.sh bin/mega65r2.mcs to flash the Xilinx FPGA.
5. Switch the dipswitch 1 to the on position, to select the keyboard's Lattice FPGA, and unplug the Arrow programmer's USB cable from your computer.
How To Program A Lattice Cpld Software Free
6. Run program.sh from the keyboard cpld directory to program the keyboard.How To Program A Lattice Cpld Software Developer
After this, all three items should be finished flashing, so that turning it off and on brings it to the same state.